home *** CD-ROM | disk | FTP | other *** search
- *% Adobe Systems PostScript(R) Printer Description File
- *% For "Dataproducts LZR 1260" version 47.0
- *% Produced by "GETapd.ps" version 3.0 edit 53
- *%
- *% Copyright 1988, 1989 Adobe Systems Incorporated. All Rights Reserved.
- *% Permission is granted for redistribution of this file as
- *% long as this copyright notice is intact and the contents
- *% of the file is not altered in any way from its original form.
- *%
- *% The byte count of this file should be exactly 022180 or 022685
- *% depending on the filesystem it resides in.
- *%
- *Date: 4/6/89
- *FormatVersion: "3.0"
- *FileVersion: "1.1"
- *LanguageVersion: English
-
- *Product: "(Dataproducts LZR 1260)"
- *PSVersion: "(47.0) 0"
- *NickName: "Dataproducts LZR 1260 v47.0"
-
- *% General Information and Defaults ===============
- *ColorDevice: False
- *FreeVM: "2396132"
- *VariablePaperSize: False
- *FileSystem: True
- *?FileSystem: "statusdict begin diskonline = flush end"
- *Throughput: "12"
- *Password: "0"
- *ExitServer: "
- count 0 eq { % is the password on the stack?
- true
- }{
- dup % potential password
- statusdict begin checkpassword end not
- } ifelse
- { % if no password or not valid
- (WARNING : Cannot perform the exitserver command.) =
- (Password supplied is not valid.) =
- (Please contact the author of this software.) = flush
- quit
- } if
- serverdict begin exitserver
- "
- *End
-
- *Reset: "
- count 0 eq { % is the password on the stack?
- true
- }{
- dup % potential password
- statusdict begin checkpassword end not
- } ifelse
- { % if no password or not valid
- (WARNING : Cannot reset printer.) =
- (Password supplied is not valid.) =
- (Please contact the author of this software.) = flush
- quit
- } if
- serverdict begin exitserver
- systemdict /quit get exec
- (WARNING : Printer Reset Failed.) = flush
- "
- *End
-
- *DefaultResolution: 300dpi
- *?Resolution: "
- save
- initgraphics
- 0 0 moveto currentpoint matrix defaultmatrix transform
- 0 72 lineto currentpoint matrix defaultmatrix transform
- 3 -1 roll sub dup mul
- 3 1 roll exch sub dup mul
- add sqrt round cvi
- ( ) cvs print (dpi) = flush
- restore
- "
- *End
-
- *% Halftone Information ===============
- *ScreenFreq: "60.0"
- *ScreenAngle: "45.0"
- *DefaultScreenProc: Dot
- *ScreenProc Dot: "
- {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
- sub }{dup mul exch dup mul add 1 exch sub }ifelse }
- "
- *End
- *ScreenProc Line: "{ pop }"
- *ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
-
- *DefaultTransfer: Null
- *Transfer Null: "{ }"
- *Transfer Null.Inverse: "{ 1 exch sub }"
-
- *% Paper Handling ===================
-
- *% Use these entries to set paper size most of the time, unless there is
- *% specific reason to use PageRegion or PaperTray.
- *% The Envelope entries are in the format:
- *% Envelope.x.y/Comment in english about the size:
- *% where x and y are the width and height dimensions in points.
- *% NOTE: The x dimension is perpendicular to the feed direction.
- *% All characters after the first '/' and before the ':' are comments about
- *% the size of the envelope. These comments may be used to display a message
- *% to the user, for example, or they may be safely ignored.
- *DefaultPageSize: Letter
- *PageSize Letter: "statusdict begin lettertray end"
- *PageSize Legal: "statusdict begin legaltray end"
- *PageSize Statement: "statusdict begin statementtray end"
- *PageSize Envelope.612.792/Letter Envelope: "statusdict begin 3 setpapertray letterenvelope end"
- *PageSize Envelope.612.1008/Legal Envelope: "statusdict begin 3 setpapertray legalenvelope end"
- *PageSize Envelope.396.612/Statement Envelope: "statusdict begin 3 setpapertray statementenvelope end"
- *PageSize Envelope.595.842/A4 Envelope: "statusdict begin 3 setpapertray a4envelope end"
- *PageSize Envelope.420.595/A5 Envelope: "statusdict begin 3 setpapertray a5envelope end"
- *PageSize Envelope.516.729/B5 Envelope: "statusdict begin 3 setpapertray b5envelope end"
- *PageSize Envelope.567.903/Folio Envelope: "statusdict begin 3 setpapertray folioenvelope end"
- *PageSize Envelope.279.639/3 7/8 Inch x 8 7/8 Inch Envelope: "statusdict begin 3 setpapertray 3.875x8.875envelope end"
- *PageSize Envelope.297.684/4 1/8 Inch x 9 1/2 Inch Envelope: "statusdict begin 3 setpapertray 4.125x9.5envelope end"
- *PageSize Envelope.324.747/4 1/2 Inch x 10 3/8 Inch Envelope: "statusdict begin 3 setpapertray 4.5x10.375envelope end"
- *PageSize Envelope.342.792/4 3/4 Inch x 11 Inch Envelope: "statusdict begin 3 setpapertray 4.75x11envelope end"
- *PageSize Envelope.360.828/5 Inch x 11 1/2 Inch Envelope: "statusdict begin 3 setpapertray 5x11.5envelope end"
- *PageSize Envelope.468.684/6 1/2 Inch x 9 1/2 Inch Envelope: "statusdict begin 3 setpapertray 6.5x9.5envelope end"
- *PageSize Envelope.540.756/7 1/2 Inch x 10 1/2 Inch Envelope: "statusdict begin 3 setpapertray 7.5x10.5envelope end"
- *PageSize Envelope.630.810/8 3/4 Inch x 11 1/4 Inch Envelope: "statusdict begin 3 setpapertray 8.75x11.25envelope end"
-
-
- *% These entries will set up the frame buffer. Usually used with manual feed.
- *DefaultPageRegion: Letter
- *PageRegion Letter: "letter"
- *PageRegion Legal: "legal"
- *PageRegion Statement: "statement"
- *PageRegion A4: "a4"
- *PageRegion A5: "a5"
- *PageRegion B5: "b5"
- *PageRegion Folio: "folio"
- *PageRegion Envelope.612.792/Letter Envelope: "statusdict begin 3 setpapertray letterenvelope end"
- *PageRegion Envelope.612.1008/Legal Envelope: "statusdict begin 3 setpapertray legalenvelope end"
- *PageRegion Envelope.396.612/Statement Envelope: "statusdict begin 3 setpapertray statementenvelope end"
- *PageRegion Envelope.595.842/A4 Envelope: "statusdict begin 3 setpapertray a4envelope end"
- *PageRegion Envelope.420.595/A5 Envelope: "statusdict begin 3 setpapertray a5envelope end"
- *PageRegion Envelope.516.729/B5 Envelope: "statusdict begin 3 setpapertray b5envelope end"
- *PageRegion Envelope.567.903/Folio Envelope: "statusdict begin 3 setpapertray folioenvelope end"
- *PageRegion Envelope.279.639/3 7/8 Inch x 8 7/8 Inch Envelope: "statusdict begin 3 setpapertray 3.875x8.875envelope end"
- *PageRegion Envelope.297.684/4 1/8 Inch x 9 1/2 Inch Envelope: "statusdict begin 3 setpapertray 4.125x9.5envelope end"
- *PageRegion Envelope.324.747/4 1/2 Inch x 10 3/8 Inch Envelope: "statusdict begin 3 setpapertray 4.5x10.375envelope end"
- *PageRegion Envelope.342.792/4 3/4 Inch x 11 Inch Envelope: "statusdict begin 3 setpapertray 4.75x11envelope end"
- *PageRegion Envelope.360.828/5 Inch x 11 1/2 Inch Envelope: "statusdict begin 3 setpapertray 5x11.5envelope end"
- *PageRegion Envelope.468.684/6 1/2 Inch x 9 1/2 Inch Envelope: "statusdict begin 3 setpapertray 6.5x9.5envelope end"
- *PageRegion Envelope.540.756/7 1/2 Inch x 10 1/2 Inch Envelope: "statusdict begin 3 setpapertray 7.5x10.5envelope end"
- *PageRegion Envelope.630.810/8 3/4 Inch x 11 1/4 Inch Envelope: "statusdict begin 3 setpapertray 8.75x11.25envelope end"
-
- *% These entries will invoke a particular tray--error may occur if tray is not inserted.
- *% These errors should be trapped by software and a message displayed
- *DefaultPaperTray: None
- *PaperTray Letter: "statusdict begin lettertray end"
- *PaperTray Legal: "statusdict begin legaltray end"
- *PaperTray Statement: "statusdict begin statementtray end"
- *PaperTray Envelope.612.792/Letter Envelope: "statusdict begin 3 setpapertray letterenvelope end"
- *PaperTray Envelope.612.1008/Legal Envelope: "statusdict begin 3 setpapertray legalenvelope end"
- *PaperTray Envelope.396.612/Statement Envelope: "statusdict begin 3 setpapertray statementenvelope end"
- *PaperTray Envelope.595.842/A4 Envelope: "statusdict begin 3 setpapertray a4envelope end"
- *PaperTray Envelope.420.595/A5 Envelope: "statusdict begin 3 setpapertray a5envelope end"
- *PaperTray Envelope.516.729/B5 Envelope: "statusdict begin 3 setpapertray b5envelope end"
- *PaperTray Envelope.567.903/Folio Envelope: "statusdict begin 3 setpapertray folioenvelope end"
- *PaperTray Envelope.279.639/3 7/8 Inch x 8 7/8 Inch Envelope: "statusdict begin 3 setpapertray 3.875x8.875envelope end"
- *PaperTray Envelope.297.684/4 1/8 Inch x 9 1/2 Inch Envelope: "statusdict begin 3 setpapertray 4.125x9.5envelope end"
- *PaperTray Envelope.324.747/4 1/2 Inch x 10 3/8 Inch Envelope: "statusdict begin 3 setpapertray 4.5x10.375envelope end"
- *PaperTray Envelope.342.792/4 3/4 Inch x 11 Inch Envelope: "statusdict begin 3 setpapertray 4.75x11envelope end"
- *PaperTray Envelope.360.828/5 Inch x 11 1/2 Inch Envelope: "statusdict begin 3 setpapertray 5x11.5envelope end"
- *PaperTray Envelope.468.684/6 1/2 Inch x 9 1/2 Inch Envelope: "statusdict begin 3 setpapertray 6.5x9.5envelope end"
- *PaperTray Envelope.540.756/7 1/2 Inch x 10 1/2 Inch Envelope: "statusdict begin 3 setpapertray 7.5x10.5envelope end"
- *PaperTray Envelope.630.810/8 3/4 Inch x 11 1/4 Inch Envelope: "statusdict begin 3 setpapertray 8.75x11.25envelope end"
-
-
- *% The following entries provide information about specific paper keywords.
- *DefaultImageableArea: Letter
- *ImageableArea Letter: "15 8 597 784"
- *ImageableArea Legal: "15 15 597 993"
- *ImageableArea Statement: "14 8 382 604"
- *ImageableArea A4: "14 8 581 834"
- *ImageableArea A5: "15 8 405 588"
- *ImageableArea B5: "13 8 503 721"
- *ImageableArea Folio: "14 8 581 928"
- *ImageableArea Envelope.612.792/Letter Envelope: "15 8 597 784"
- *ImageableArea Envelope.612.1008/Legal Envelope: "15 15 597 993"
- *ImageableArea Envelope.396.612/Statement Envelope: "14 8 382 604"
- *ImageableArea Envelope.595.842/A4 Envelope: "14 8 581 834"
- *ImageableArea Envelope.420.595/A5 Envelope: "15 8 405 588"
- *ImageableArea Envelope.516.729/B5 Envelope: "13 8 503 721"
- *ImageableArea Envelope.567.903/Folio Envelope: "14 8 581 928"
- *ImageableArea Envelope.279.639/3 7/8 Inch x 8 7/8 Inch Envelope: "13 15 266 624"
- *ImageableArea Envelope.297.684/4 1/8 Inch x 9 1/2 Inch Envelope: "15 15 282 669"
- *ImageableArea Envelope.324.747/4 1/2 Inch x 10 3/8 Inch Envelope: "17 15 307 732"
- *ImageableArea Envelope.342.792/4 3/4 Inch x 11 Inch Envelope: "14 15 328 777"
- *ImageableArea Envelope.360.828/5 Inch x 11 1/2 Inch Envelope: "15 15 344 813"
- *ImageableArea Envelope.468.684/6 1/2 Inch x 9 1/2 Inch Envelope: "16 15 452 669"
- *ImageableArea Envelope.540.756/7 1/2 Inch x 10 1/2 Inch Envelope: "13 15 527 741"
- *ImageableArea Envelope.630.810/8 3/4 Inch x 11 1/4 Inch Envelope: "16 15 614 795"
- *?ImageableArea: "
- save /cvp { cvi ( ) cvs print ( ) print } bind def
- newpath clippath pathbbox
- 4 -2 roll exch 2 {ceiling cvp} repeat
- exch 2 {floor cvp} repeat flush
- restore
- "
- *End
-
- *% These provide the physical dimensions of the paper (by keyword)
- *DefaultPaperDimension: Letter
- *PaperDimension Letter: "612 792"
- *PaperDimension Legal: "612 1008"
- *PaperDimension Statement: "396 612"
- *PaperDimension A4: "595 842"
- *PaperDimension A5: "420 595"
- *PaperDimension B5: "516 729"
- *PaperDimension Folio: "567 903.5"
- *PaperDimension Envelope.612.792/Letter Envelope: "612 792"
- *PaperDimension Envelope.612.1008/Legal Envelope: "612 1008"
- *PaperDimension Envelope.396.612/Statement Envelope: "396 612"
- *PaperDimension Envelope.595.842/A4 Envelope: "595 842"
- *PaperDimension Envelope.420.595/A5 Envelope: "420 595"
- *PaperDimension Envelope.516.729/B5 Envelope: "516 729"
- *PaperDimension Envelope.567.903/Folio Envelope: "567 903"
- *PaperDimension Envelope.279.639/3 7/8 Inch x 8 7/8 Inch Envelope: "279 639"
- *PaperDimension Envelope.297.684/4 1/8 Inch x 9 1/2 Inch Envelope: "297 684"
- *PaperDimension Envelope.324.747/4 1/2 Inch x 10 3/8 Inch Envelope: "324 747"
- *PaperDimension Envelope.342.792/4 3/4 Inch x 11 Inch Envelope: "342 792"
- *PaperDimension Envelope.360.828/5 Inch x 11 1/2 Inch Envelope: "360 828"
- *PaperDimension Envelope.468.684/6 1/2 Inch x 9 1/2 Inch Envelope: "468 684"
- *PaperDimension Envelope.540.756/7 1/2 Inch x 10 1/2 Inch Envelope: "540 756"
- *PaperDimension Envelope.630.810/8 3/4 Inch x 11 1/4 Inch Envelope: "630 810"
-
- *DefaultOutputBin: Upper
- *OutputBin Upper: "statusdict begin 0 setoutputtray end"
- *OutputBin Lower: "statusdict begin 1 setoutputtray end"
-
- *DefaultInputSlot: Upper
- *InputSlot Upper: "statusdict begin 0 setpapertray end"
- *InputSlot Middle: "statusdict begin 1 setpapertray end"
- *InputSlot Lower: "statusdict begin 2 setpapertray end"
- *InputSlot Envelope: "statusdict begin 3 setpapertray end"
- *?InputSlot: "
- save statusdict begin
- 5 dict begin
- /0 (Upper) def
- /1 (Middle) def
- /2 (Lower) def
- /3 (Envelope) def
- papertray
- {( ) cvs cvn load exec} stopped not{= flush}if
- end
- end restore
- "
- *End
-
- *DefaultManualFeed: False
- *?ManualFeed: "statusdict /manualfeed get {(True)}{(False)}ifelse = flush"
- *ManualFeed True: "statusdict begin /manualfeed true store end"
- *ManualFeed False: "statusdict begin /manualfeed false store end"
-
- *% The following will require some hand editing:
- *DefaultOutputOrder: Normal
- *OutputOrder Normal: "statusdict begin 0 setoutputtray end"
- *OutputOrder Reverse: "statusdict begin 1 setoutputtray end"
- *?OutputOrder: "
- save statusdict begin
- 3 dict begin
- /0 (Normal) def
- /1 (Reverse) def
- outputtray
- {( ) cvs cvn load exec} stopped not{= flush}if
- end
- end restore
- "
- *End
-
- *DefaultCollator: None
- *DefaultSorter: None
- *DefaultDuplex: None
-
- *% Font Information =====================
-
- *DefaultFont: Courier
- *Font AvantGarde-Book: Standard "(001.001)"
- *Font AvantGarde-BookOblique: Standard "(001.001)"
- *Font AvantGarde-Demi: Standard "(001.001)"
- *Font AvantGarde-DemiOblique: Standard "(001.001)"
- *Font Bookman-Demi: Standard "(001.001)"
- *Font Bookman-DemiItalic: Standard "(001.001)"
- *Font Bookman-Light: Standard "(001.001)"
- *Font Bookman-LightItalic: Standard "(001.001)"
- *Font Courier: Standard "(001.004)"
- *Font Courier-Bold: Standard "(001.004)"
- *Font Courier-BoldOblique: Standard "(001.004)"
- *Font Courier-Oblique: Standard "(001.004)"
- *Font Helvetica: Standard "(001.001)"
- *Font Helvetica-Bold: Standard "(001.001)"
- *Font Helvetica-BoldOblique: Standard "(001.001)"
- *Font Helvetica-Narrow: Standard "(001.000)"
- *Font Helvetica-Narrow-Bold: Standard "(001.000)"
- *Font Helvetica-Narrow-BoldOblique: Standard "(001.000)"
- *Font Helvetica-Narrow-Oblique: Standard "(001.000)"
- *Font Helvetica-Oblique: Standard "(001.001)"
- *Font NewCenturySchlbk-Bold: Standard "(001.002)"
- *Font NewCenturySchlbk-BoldItalic: Standard "(001.001)"
- *Font NewCenturySchlbk-Italic: Standard "(001.001)"
- *Font NewCenturySchlbk-Roman: Standard "(001.002)"
- *Font Palatino-Bold: Standard "(001.001)"
- *Font Palatino-BoldItalic: Standard "(001.001)"
- *Font Palatino-Italic: Standard "(001.002)"
- *Font Palatino-Roman: Standard "(001.001)"
- *Font Symbol: Special "(001.001)"
- *Font Times-Bold: Standard "(001.001)"
- *Font Times-BoldItalic: Standard "(001.001)"
- *Font Times-Italic: Standard "(001.001)"
- *Font Times-Roman: Standard "(001.001)"
- *Font ZapfChancery-MediumItalic: Standard "(001.002)"
- *Font ZapfDingbats: Special "(001.000)"
- *?FontQuery: "
- save 4 dict begin /sv exch def
- /str (fonts/ ) def
- /st2 30 string def
- {
- count 0 gt {
- dup st2 cvs (/) print print (:) print
- dup FontDirectory exch known {pop (Yes)}{
- str exch st2 cvs dup length /len exch def
- 6 exch putinterval str 0 len 6 add getinterval mark exch
- { } st2 filenameforall counttomark 0 gt {
- cleartomark (Yes)}{cleartomark (No)}ifelse
- }ifelse = flush
- }{ exit } ifelse
- } bind loop
- (*) = flush
- sv end restore
- "
- *End
-
- *?FontList: "
- save 2 dict begin /sv exch def
- /str 128 string def
- FontDirectory { pop == } bind forall flush
- /filenameforall where {
- pop save (fonts/*) {
- dup length 6 sub 6 exch getinterval cvn ==
- } bind str filenameforall flush restore
- } if
- (*) = flush
- sv end restore
- "
- *End
-
- *% Printer Messages (verbatim from printer):
- *Message: "%%[ exitserver: permanent state may be changed ]%%"
- *Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
- *Message: "\FontName\ not found, using Courier"
- *Message: "%%[ Operator reset, flushing job to end-of-file ]%%"
- *Message: "%%[ Waiting for manual feed ]%%"
- *Message: "%%[ Fuser near expiration ]%%"
- *Message: "%%[ Developer near expiration ]%%"
- *Message: "%%[ Drum near expiration ]%%"
-
- *% Status (format: %%[ status: <one of these> ]%% )
- *Status: "idle"
- *Status: "busy"
- *Status: "waiting"
- *Status: "printing"
- *Status: "initializing"
- *Status: "printing test page"
- *Status: "processing first job"
- *Status: "PrinterError: controller not responding"
- *Status: "PrinterError: Resetting Printer"
- *Status: "PrinterError: Adding Toner"
- *Status: "PrinterError: Test Print/Maintenance"
- *Status: "PrinterError: Warming Up"
- *Status: "PrinterError: Developer Cart Not Installed"
- *Status: "PrinterError: Exit Tray Full"
- *Status: "PrinterError: Main Cassette Out of Paper"
- *Status: "PrinterError: Upper Cassette Out of Paper"
- *Status: "PrinterError: Lower Cassette Out of Paper"
- *Status: "PrinterError: Envelope Feeder Out of Paper"
- *Status: "PrinterError: Manual Feed Timeout"
- *Status: "PrinterError: Envelope Feeder Misfeed"
- *Status: "PrinterError: Manual Feed Paper Misfeed"
- *Status: "PrinterError: Face Up Exit Tray Misfeed"
- *Status: "PrinterError: Face Down Exit Tray Misfeed"
- *Status: "PrinterError: Lower Cassette Misfeed"
- *Status: "PrinterError: Upper Cassette Misfeed"
- *Status: "PrinterError: Main Cassette Misfeed"
- *Status: "PrinterError: Out of Toner"
- *Status: "PrinterError: Cover Open"
- *Status: "PrinterError: Drum Cartridge Not Installed"
- *Status: "PrinterError: Fuser Cartridge Not Installed"
- *Status: "PrinterError: Developer Life Expired"
- *Status: "PrinterError: Drum Life Expired"
- *Status: "PrinterError: Fuser Life Expired"
- *Status: "PrinterError: New Developer Cartridge"
- *Status: "PrinterError: Main Charger Not Installed"
- *Status: "PrinterError: Developer Over-Toned"
- *Status: "PrinterError: Fuser Cartridge Fault"
- *Status: "PrinterError: Laser Scan Signal Not Detected"
- *Status: "PrinterError: Mirror Motor Fault"
- *Status: "PrinterError: Laser Fault"
- *Status: "PrinterError: Main Motor Fault"
- *Status: "PrinterError: H/W: Remove NVM Access Jumper"
- *Status: "PrinterError: H/W: Toner Recycling Motor Flt"
- *Status: "PrinterError: H/W: I/F Timing Fault"
- *Status: "PrinterError: H/W: Envelope Feed Motor Fault"
- *Status: "PrinterError: H/W: Env Gate Cam Sensor Undet"
- *Status: "PrinterError: H/W: M-Cas Algn Cam Sen Undet"
- *Status: "PrinterError: H/W: M-Cas Feed Cam Sen Undet"
- *Status: "PrinterError: H/W: Main Logic CCA Fault"
-
- *% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
- *Source: "serial9"
- *Source: "serial25"
- *Source: "Parallel"
- *Source: "AppleTalk"
-
- *% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
- *PrinterError: "controller not responding"
- *PrinterError: "Resetting Printer"
- *PrinterError: "Adding Toner"
- *PrinterError: "Test Print/Maintenance"
- *PrinterError: "Warming Up"
- *PrinterError: "Developer Cart Not Installed"
- *PrinterError: "Exit Tray Full"
- *PrinterError: "Main Cassette Out of Paper"
- *PrinterError: "Upper Cassette Out of Paper"
- *PrinterError: "Lower Cassette Out of Paper"
- *PrinterError: "Envelope Feeder Out of Paper"
- *PrinterError: "Manual Feed Timeout"
- *PrinterError: "Envelope Feeder Misfeed"
- *PrinterError: "Manual Feed Paper Misfeed"
- *PrinterError: "Face Up Exit Tray Misfeed"
- *PrinterError: "Face Down Exit Tray Misfeed"
- *PrinterError: "Lower Cassette Misfeed"
- *PrinterError: "Upper Cassette Misfeed"
- *PrinterError: "Main Cassette Misfeed"
- *PrinterError: "Out of Toner"
- *PrinterError: "Cover Open"
- *PrinterError: "Drum Cartridge Not Installed"
- *PrinterError: "Fuser Cartridge Not Installed"
- *PrinterError: "Developer Life Expired"
- *PrinterError: "Drum Life Expired"
- *PrinterError: "Fuser Life Expired"
- *PrinterError: "New Developer Cartridge"
- *PrinterError: "Main Charger Not Installed"
- *PrinterError: "Developer Over-Toned"
- *PrinterError: "Fuser Cartridge Fault"
- *PrinterError: "Laser Scan Signal Not Detected"
- *PrinterError: "Mirror Motor Fault"
- *PrinterError: "Laser Fault"
- *PrinterError: "Main Motor Fault"
- *PrinterError: "H/W: Remove NVM Access Jumper"
- *PrinterError: "H/W: Toner Recycling Motor Flt"
- *PrinterError: "H/W: I/F Timing Fault"
- *PrinterError: "H/W: Envelope Feed Motor Fault"
- *PrinterError: "H/W: Env Gate Cam Sensor Undet"
- *PrinterError: "H/W: M-Cas Algn Cam Sen Undet"
- *PrinterError: "H/W: M-Cas Feed Cam Sen Undet"
- *PrinterError: "H/W: Main Logic CCA Fault"
-
- *%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
-
- *% Color Separation Information =====================
-
- *DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
-
- *InkName: ProcessBlack/Process Black
- *InkName: CustomColor/Custom Color
- *InkName: ProcessCyan/Process Cyan
- *InkName: ProcessMagenta/Process Magenta
- *InkName: ProcessYellow/Process Yellow
-
- *% For 60 lpi / 300 dpi =====================================================
-
- *ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
- *ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
- *ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
- *ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
- *ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
-
- *ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
- *ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
- *ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
- *ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
- *ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
-
- *% For 53 lpi / 300 dpi =====================================================
-
- *ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
- *ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
- *ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
- *ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
- *ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
-
- *ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
- *ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
- *ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
- *ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
- *ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
-
- *% end of PPD file for Dataproducts LZR 1260
-